Beaded-Poppies-Quick-Reference-Flat-Stitch-Beading-Basics Sundaylace Creations & Bling

Beaded Poppies Quick Reference: Flat Stitch Beading Basics

How to Make a Beaded Poppy: Flat Stitch Beading for Beginners

New to flat-stitch beadwork? A beaded poppy is a lovely project to help you practise. This guide walks you through the two-bead stitch, one step at a time, with a video you can follow along with. 💜

Take your time, keep your pattern nearby, and remember: every beader starts somewhere!

Watch the beaded poppy tutorial

Watch Mariah’s flat-stitch beaded poppy tutorial on YouTube

Use the video alongside the written steps below. You can also jump to a section using the video guide near the end of this post.

What you’ll need

  • A poppy pattern and beading foundation, such as Lacy’s Stiff Stuff or GoodFelt
  • Seed beads in your chosen colours
  • A black centre gem
  • A beading needle, thread and scissors
  • Suitable glue if you’re gluing your pattern or gem
  • Backing material and a pin back if you’re making a brooch
  • Optional rhinestone chain for extra sparkle

Looking for supplies? Explore our Beaded Poppy Starter Kit. Check the listing for the current kit contents.

Step 1: Prepare your pattern

Place your poppy pattern on top of your beading foundation. Glue or sew it down to keep it in place while you bead. Leave enough foundation around the design to hold comfortably.

If you use glue, follow the instructions on the product and allow it to dry before stitching.

Step 2: Add the centre gem

Place the black gem in the centre of your poppy. Sew it down if it has holes, or use a suitable strong glue for a glue-on gem. Follow the glue’s drying and ventilation instructions.

Step 3: Thread your needle

Thread your beading needle and tie a knot at the end. A manageable length of thread is easier to work with and can help prevent tangles.

Step 4: Come up through your foundation

Choose your starting point on the pattern. Bring your needle from the back of the foundation to the front, pulling the thread through until the knot rests against the back.

Step 5: Pick up two beads

Pick up two seed beads and lay them along your pattern line. Pass your needle down through the foundation immediately after the second bead to tack them in place.

Step 6: Come up between the beads

Bring your needle back up through the foundation between the two beads. Then pass it through the second bead in the direction you’re stitching.

Your thread should now come out of that last bead, ready for your next pair.

Remember: Add two beads. Stitch down. Come up between them. Pass through the last bead.

Step 7: Repeat along your pattern

Pick up two more beads and repeat. Continue along the line, taking your time around curves. Your beads should sit against the foundation without loose loops or fabric that’s pulled too tightly.

Step 8: Fill in your poppy

Continue working through your design, checking each row as you go. If beads are crowded or lifting, adjust the spacing before moving on.

For a visual look at outlining and filling the petals, follow along with the video above.

Step 9: Prepare your backing

Once your beading is complete, secure any loose thread ends. Carefully trim the excess foundation without cutting your stitches, and prepare your backing to fit the shape of your poppy.

If you’re adding a pin back, plan where it will sit before closing the layers. The video has a section labelled “Finalizing the assembly” to help you see this stage.

Step 10: Finish your edges

Ready to join your foundation and backing? Our Basic Zipper Edging tutorial walks you through one way to finish the edge with beads.

Find your place in the video

These are approximate starting points from YouTube’s automatic chapter guide:

More help for beaders

Have a tip that helped you when you started beading? Share it in the comments to help another new beader. 🥰

💜 Bead with a Happy Heart 💜

I’d keep your existing illustrations alongside the steps and embed your video near the top. The two old finishing links have working replacements above. Would you like me to apply this to the existing Shopify post?

 

Quick Refresher - Beaded Poppies Quick Reference: Flat Stitch Beading Basics

https://www.tiktok.com/@sundaylacecreations/video/7160678576277228805?q=sundaylacecreations&t=1678292557161

*Pre-step Glue down/Sew down your pattern on the top of the beading foundation. Then place the middle black gem in the center, either gluing it down with e6000 or strong glue or sewing it down.*

1. Thread needle and add knot.
2. Go through your beading foundation (lacy stiff stuff/good felt) coming out from the starting point of your project.
3. Pick up two beads and line them up on foundation. (b) Tack them down by going through the foundation.
4. Come up between the two beads (c) and exit out of the last bead (d).
Repeat... Hopefully the visual makes sense but there is plenty of youtube tutorials on flat stitch bead embroidery linked at our Sundaylace Creations youtube page.

Feel free to share and leave any tips in the comments to help our new beaders 🥰
💜Bead with a Happy Heart 💜


Www.Sundaylacecreations.Com

Need More Help

Visually see how to bead: https://youtu.be/Gw3RPMAkZc8

Need to know how to edge beadwork? https://sundaylacecreations.com/blogs/aboriginal-beading-questions-answers/how-to-edge-your-beadwork-basic-zipper-edging

Do you want to try double needle beadwork?

https://sundaylacecreations.com/blogs/aboriginal-beading-questions-answers/wanna-try-double-needle-flat-stitching

Back to blog

5 comments

Thank you so much for this tutorial. Drew my own design but this was the best help ever! Mahsi Cho

Jodi

This is a fantastic resource…very clear and informative. Thank you for sharing this knowledge!

Ma.Veronica_Lace

Like to no more

Judy James

Do u got size 8 beads in gold

Cynthia murillo

I like the way u did this,Sept by Sept

Cynthia murillo

Leave a comment

Please note, comments need to be approved before they are published.